ffmpeg.git
7 years agoxl: Make sure the width is valid
Luca Barbato [Sun, 28 Jul 2013 16:24:15 +0000 (18:24 +0200)]
xl: Make sure the width is valid

And undo the wrong commit f1cb490d6d7391ff7e28cc376908cc98a652228d

CC: libav-stable@libav.org
7 years agohttp: Support reading gzip/deflate compressed data
Zhang Rui [Mon, 22 Jul 2013 20:07:10 +0000 (04:07 +0800)]
http: Support reading gzip/deflate compressed data

Derived from VLC's http module.
Original authors:
  Antoine Cellerier <dionoea@videolan.org>
  Sébastien Escudier <sebastien-devel@celeos.eu>
  Rémi Duraffort <ivoire@videolan.org>
  Rémi Denis-Courmont <remi@remlab.net>
  Francois Cartegnie <fcvlcdev@free.fr>

Normally, http servers shouldn't send this to us since we
don't advertise it with an Accept-Encoding header, but some
servers still do it anyway.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoutvideoenc: use av_image_copy_plane()
Paul B Mahol [Sat, 27 Jul 2013 13:51:36 +0000 (13:51 +0000)]
utvideoenc: use av_image_copy_plane()

Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
7 years agoaasc: Check minimum buffer size
Luca Barbato [Sun, 7 Jul 2013 10:31:19 +0000 (12:31 +0200)]
aasc: Check minimum buffer size

Prevent some overreads.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoqdm2: Whitespace cosmetics
Luca Barbato [Tue, 9 Jul 2013 11:32:42 +0000 (13:32 +0200)]
qdm2: Whitespace cosmetics

7 years agoflac: use meaningful return values
Luca Barbato [Wed, 10 Jul 2013 14:34:14 +0000 (16:34 +0200)]
flac: use meaningful return values

7 years agoxl: Fix the buffer size check
Luca Barbato [Sat, 27 Jul 2013 18:34:07 +0000 (20:34 +0200)]
xl: Fix the buffer size check

Also make it the first check.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoxl: K&R formatting cosmetics
Luca Barbato [Sat, 27 Jul 2013 18:01:03 +0000 (20:01 +0200)]
xl: K&R formatting cosmetics

7 years agodoc: cosmetics: Consistently format list and table items
Diego Biurrun [Tue, 26 Mar 2013 00:09:00 +0000 (01:09 +0100)]
doc: cosmetics: Consistently format list and table items

7 years agoAdd missing deprecation attributes
Diego Biurrun [Thu, 28 Feb 2013 18:24:29 +0000 (19:24 +0100)]
Add missing deprecation attributes

7 years agoeval: Explicitly ignore return value of strtod() in parse_db()
Diego Biurrun [Sat, 27 Jul 2013 11:14:15 +0000 (13:14 +0200)]
eval: Explicitly ignore return value of strtod() in parse_db()

The return value is not needed.  This fixes the warning:
libavutil/eval.c:353:15: warning: ignoring return value of ‘strtod’

7 years agoRemove unreachable returns
Diego Biurrun [Thu, 14 Feb 2013 11:42:57 +0000 (12:42 +0100)]
Remove unreachable returns

7 years agoavidec: Let the inner dv demuxer take care of discarding
Luca Barbato [Sat, 27 Jul 2013 13:48:41 +0000 (15:48 +0200)]
avidec: Let the inner dv demuxer take care of discarding

CC: libav-stable@libav.org
7 years agoavidec: K&R formatting cosmetics
Luca Barbato [Sat, 27 Jul 2013 10:47:09 +0000 (12:47 +0200)]
avidec: K&R formatting cosmetics

Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
7 years agobuild: Only check FATE dependencies when running FATE tests
Diego Biurrun [Thu, 18 Jul 2013 16:12:27 +0000 (18:12 +0200)]
build: Only check FATE dependencies when running FATE tests

Only check dependencies if invoking the make targets 'check'
or anything matching 'fate%' except 'fate-rsync'.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoh264: K&R formatting cosmetics
Diego Biurrun [Fri, 26 Jul 2013 19:03:55 +0000 (21:03 +0200)]
h264: K&R formatting cosmetics

7 years agobuffersink: K&R formatting cosmetics
Diego Biurrun [Fri, 26 Jul 2013 19:09:36 +0000 (21:09 +0200)]
buffersink: K&R formatting cosmetics

7 years agowtv: Drop some casts that now are unnecessary
Martin Storsjö [Fri, 26 Jul 2013 18:50:40 +0000 (21:50 +0300)]
wtv: Drop some casts that now are unnecessary

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agowtv: Make WTV_SECTOR_BITS a 64 bit constant
Martin Storsjö [Wed, 24 Jul 2013 09:21:49 +0000 (12:21 +0300)]
wtv: Make WTV_SECTOR_BITS a 64 bit constant

This makes sure that values that are left-shifted by this constant
end up casted to 64 bit before shifting, avoiding overflow if the
value ends up larger than 2 GB.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoAIX: add support for shared builds
Michael Kostylev [Thu, 25 Jul 2013 15:37:20 +0000 (11:37 -0400)]
AIX: add support for shared builds

Signed-off-by: Diego Biurrun <diego@biurrun.de>
7 years agoavio: Don't set the seekable flag if no seek function is provided
Hendrik Schreiber [Tue, 23 Jul 2013 09:25:34 +0000 (11:25 +0200)]
avio: Don't set the seekable flag if no seek function is provided

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agortpenc: Fix some odd comments
Martin Storsjö [Fri, 26 Jul 2013 17:40:25 +0000 (20:40 +0300)]
rtpenc: Fix some odd comments

Some weird comments stem from the fact that the rtpdec and rtpenc
code was shared earlier.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agolavfi: add attribute_align_arg to all public entry points
Hendrik Leppkes [Fri, 26 Jul 2013 08:20:47 +0000 (10:20 +0200)]
lavfi: add attribute_align_arg to all public entry points

Previously it was partly only added to central functions called
internally, however if GCC would inline these into the public fuction, the
alignment attribute would not take effect.

Instead, add it to all public entry points to avoid these problems.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agomiscellaneous typo fixes
Diego Biurrun [Sat, 4 May 2013 19:18:13 +0000 (21:18 +0200)]
miscellaneous typo fixes

7 years agompeg12: Ignore slice threading if hwaccel is active
Rémi Denis-Courmont [Wed, 24 Jul 2013 16:50:43 +0000 (19:50 +0300)]
mpeg12: Ignore slice threading if hwaccel is active

Slice threading does not work with hardware acceleration, as decoding
is per-picture.  This fixes Bugzilla #542.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
7 years agovdpau: Fix VC-1 interlaced mode
Rainer Hochecker [Wed, 24 Jul 2013 16:50:42 +0000 (19:50 +0300)]
vdpau: Fix VC-1 interlaced mode

VDPAU expects the bitstream value (0, 2 or 3).
libavcodec uses an enum (0, 1 or 2).

Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
7 years agocosmetics: Add '0' to float constants ending in '.'.
Diego Biurrun [Tue, 23 Jul 2013 21:48:45 +0000 (23:48 +0200)]
cosmetics: Add '0' to float constants ending in '.'.

7 years agotwinvq: K&R formatting cosmetics
Diego Biurrun [Fri, 19 Jul 2013 22:06:29 +0000 (00:06 +0200)]
twinvq: K&R formatting cosmetics

7 years agoarm: Comment out unused labels in simple_idct_arm
Martin Storsjö [Wed, 24 Jul 2013 09:22:55 +0000 (12:22 +0300)]
arm: Comment out unused labels in simple_idct_arm

When building for iOS in thumb mode, gas-preprocessor.pl doesn't
mark unused labels as thumb functions (as it does for other
local labels, where it can figure out that they are functions
due to being referenced in branch instructions). This leads to
linker warnings for some of those local labels, such as:

ld: warning: ARM function not 4-byte aligned: __a_evaluation from
libavcodec/libavcodec.a(simple_idct_arm.o)

Therefore, comment them out since they don't have any function.
They do still have a value in documenting key points in the
assembly source though.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years ago8bps: Make the bound-checks consistent
Luca Barbato [Tue, 23 Jul 2013 12:19:09 +0000 (14:19 +0200)]
8bps: Make the bound-checks consistent

7 years ago8bps: Bound-check the input buffer
Luca Barbato [Mon, 22 Jul 2013 21:26:05 +0000 (23:26 +0200)]
8bps: Bound-check the input buffer

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years ago4xm: Reject not a multiple of 16 dimension
Luca Barbato [Mon, 22 Jul 2013 10:44:19 +0000 (12:44 +0200)]
4xm: Reject not a multiple of 16 dimension

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoalsdec: Clean up error paths
Luca Barbato [Fri, 12 Jul 2013 21:38:02 +0000 (23:38 +0200)]
alsdec: Clean up error paths

Fix at least a memory leak.

CC: libav-stable@libav.org
7 years agoalsdec: Fix the clipping range
Luca Barbato [Fri, 12 Jul 2013 21:02:25 +0000 (23:02 +0200)]
alsdec: Fix the clipping range

mcc_weightings is only 32 elements.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoarm: Mangle external symbols properly in new vfp assembly files
Martin Storsjö [Mon, 22 Jul 2013 09:24:43 +0000 (12:24 +0300)]
arm: Mangle external symbols properly in new vfp assembly files

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoarm: Add VFP-accelerated version of qmf_32_subbands
Ben Avison [Mon, 15 Jul 2013 17:28:17 +0000 (18:28 +0100)]
arm: Add VFP-accelerated version of qmf_32_subbands

               Before           After
               Mean    StdDev   Mean    StdDev  Change
This function   1323.0  98.0      746.2  60.6   +77.3%
Overall        15400.0 336.4    14147.5 288.4    +8.9%

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agodcadsp: Add a new method, qmf_32_subbands
Ben Avison [Mon, 15 Jul 2013 17:28:16 +0000 (18:28 +0100)]
dcadsp: Add a new method, qmf_32_subbands

This does most of the work formerly carried out by
the static function qmf_32_subbands() in dcadec.c.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoarm: Add VFP-accelerated version of fft16
Martin Storsjö [Fri, 19 Jul 2013 08:23:57 +0000 (11:23 +0300)]
arm: Add VFP-accelerated version of fft16

               Before           After
               Mean    StdDev   Mean    StdDev  Change
This function   1389.3  4.2       967.8  35.1   +43.6%
Overall        15577.5 83.2     15400.0 336.4    +1.2%

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoarm: Add VFP-accelerated version of dca_lfe_fir
Martin Storsjö [Fri, 19 Jul 2013 08:03:32 +0000 (11:03 +0300)]
arm: Add VFP-accelerated version of dca_lfe_fir

               Before           After
               Mean    StdDev   Mean    StdDev  Change
This function    868.2  33.5      436.0  27.0   +99.1%
Overall        15973.0 223.2    15577.5  83.2    +2.5%

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoarm: Add VFP-accelerated version of imdct_half
Martin Storsjö [Fri, 19 Jul 2013 07:59:17 +0000 (10:59 +0300)]
arm: Add VFP-accelerated version of imdct_half

               Before           After
               Mean    StdDev   Mean    StdDev  Change
This function   2653.0  28.5     1108.8  51.4   +139.3%
Overall        17049.5 408.2    15973.0 223.2     +6.7%

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoarm: Add VFP-accelerated version of int32_to_float_fmul_array8
Ben Avison [Mon, 15 Jul 2013 17:28:12 +0000 (18:28 +0100)]
arm: Add VFP-accelerated version of int32_to_float_fmul_array8

               Before           After
               Mean    StdDev   Mean    StdDev  Change
This function    366.2  18.3      277.8  13.7   +31.9%
Overall        18420.5 489.1    17049.5 408.2    +8.0%

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agodcadec: Use int32_to_float_fmul_array8
Ben Avison [Tue, 16 Jul 2013 12:41:18 +0000 (15:41 +0300)]
dcadec: Use int32_to_float_fmul_array8

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agofmtconvert: Add a new method, int32_to_float_fmul_array8
Ben Avison [Mon, 15 Jul 2013 17:28:11 +0000 (18:28 +0100)]
fmtconvert: Add a new method, int32_to_float_fmul_array8

This is similar to int32_to_float_fmul_scalar, but
loads a new scalar multiplier every 8 input samples.
This enables the use of much larger input arrays, which
is important for pipelining on some CPUs (such as
ARMv6).

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoarm: Add VFP-accelerated version of int32_to_float_fmul_scalar
Ben Avison [Mon, 15 Jul 2013 17:28:10 +0000 (18:28 +0100)]
arm: Add VFP-accelerated version of int32_to_float_fmul_scalar

               Before           After
               Mean    StdDev   Mean    StdDev  Change
This function   1175.0   4.4      366.2  18.3   +220.8%
Overall        19285.5 292.0    18420.5 489.1     +4.7%

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoarm: Add VFP-accelerated version of synth_filter_float
Ben Avison [Mon, 15 Jul 2013 17:28:09 +0000 (18:28 +0100)]
arm: Add VFP-accelerated version of synth_filter_float

               Before           After
               Mean    StdDev   Mean    StdDev  Change
This function   9295.0 114.9     4853.2 83.5    +91.5%
Overall        23699.8 397.6    19285.5 292.0   +22.9%

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agolibspeexdec: fix detection of final terminator code
Justin Ruggles [Sat, 13 Jul 2013 15:55:33 +0000 (11:55 -0400)]
libspeexdec: fix detection of final terminator code

7 years agoconfigure: generate full msvc debug symbols when linking in debug mode
Hendrik Leppkes [Fri, 19 Jul 2013 13:44:39 +0000 (15:44 +0200)]
configure: generate full msvc debug symbols when linking in debug mode

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agolibx264: Define X264_API_IMPORTS on MSVC/ICL
Derek Buitenhuis [Fri, 19 Jul 2013 18:25:57 +0000 (14:25 -0400)]
libx264: Define X264_API_IMPORTS on MSVC/ICL

libx264 has a few data exports which require X264_API_IMPORTS
to be defined if we link to libx264 dynamically on Windows.

In a similar fashion to how we handle our compat snprintf
implementation, if we define it all the time, the compiler
will first try and link to __imp_x264_symbol_name, and failing
that, as in the case of a static libx264, will attempt to link
to the non-prefixed symbol, which has already been pulled in by
other x264 functions' object files.

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
7 years agodsicinav: Clip the source size to the expected maximum
Luca Barbato [Fri, 19 Jul 2013 19:34:21 +0000 (21:34 +0200)]
dsicinav: Clip the source size to the expected maximum

A packet larger than cin->bitmap_size does not make sense.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agodsicinav: Bound-check the source buffer when needed
Luca Barbato [Fri, 19 Jul 2013 19:09:40 +0000 (21:09 +0200)]
dsicinav: Bound-check the source buffer when needed

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agodsicinav: K&R formatting cosmetics
Luca Barbato [Fri, 19 Jul 2013 19:05:44 +0000 (21:05 +0200)]
dsicinav: K&R formatting cosmetics

7 years agolavfi: filtfmts: use newer avfilter APIs
Vittorio Giovara [Tue, 16 Jul 2013 13:05:01 +0000 (15:05 +0200)]
lavfi: filtfmts: use newer avfilter APIs

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agortsp: Support multicast source filters (RFC 4570)
Ed Torbett [Thu, 27 Jun 2013 07:53:00 +0000 (08:53 +0100)]
rtsp: Support multicast source filters (RFC 4570)

This supports inclusion of one single IP address for now,
at the media level. Specifying the filter at the session level
(instead of at the media level), multiple source addresses,
exclusion, or using FQDNs instead of plain IP addresses is not
supported (yet at least).

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agortpproto: Check the source IP if one single source has been specified
Martin Storsjö [Thu, 18 Jul 2013 18:12:14 +0000 (21:12 +0300)]
rtpproto: Check the source IP if one single source has been specified

If another peer is sending unicast packets to the same port that
we are listening on, those packets can end up being received despite
using source specific multicast. For those cases, manually check the
source address of received packets against the intended source address.

This only handles the case when the source list is one single IP
address for now, which probably is the most common case.

Based on a patch by Ed Torbett.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agortpproto: Support IGMPv3 source specific multicast inclusion
Ed Torbett [Thu, 18 Jul 2013 17:04:16 +0000 (20:04 +0300)]
rtpproto: Support IGMPv3 source specific multicast inclusion

Blocking/exclusion is not supported yet.

The rtp protocol parameter takes the same form as the existing
sources parameter for the udp protocol.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agocompat: Add missing license boilerplates
Diego Biurrun [Thu, 18 Jul 2013 13:13:18 +0000 (15:13 +0200)]
compat: Add missing license boilerplates

7 years agoEmploy consistent LIBAV_COMPAT_ multiple inclusion guards in compat/
Diego Biurrun [Thu, 25 Oct 2012 14:49:26 +0000 (16:49 +0200)]
Employ consistent LIBAV_COMPAT_ multiple inclusion guards in compat/

Also fix a comment and an #endif comment.

7 years agoavserver: Remove unused loadable module support
Martin Storsjö [Wed, 17 Jul 2013 15:24:23 +0000 (18:24 +0300)]
avserver: Remove unused loadable module support

There is no record of this ever being used at all, anywhere,
since the feature was added in 2effd274466.

This gets rid of extra linker tricks just to support a feature
that isn't used, simplifying portability to other platforms.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoConsistently use "cpu_flags" as variable/parameter name for CPU flags
Diego Biurrun [Wed, 17 Jul 2013 18:19:24 +0000 (20:19 +0200)]
Consistently use "cpu_flags" as variable/parameter name for CPU flags

7 years agofmtconvert: Explicitly use int32_t instead of int
Christophe Gisquet [Thu, 27 Dec 2012 21:33:51 +0000 (22:33 +0100)]
fmtconvert: Explicitly use int32_t instead of int

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agopthread: Rename thread_init to avoid symbol collision
Sean McGovern [Tue, 16 Jul 2013 15:31:23 +0000 (11:31 -0400)]
pthread: Rename thread_init to avoid symbol collision

The AIX threads library exposes a function with the same name.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agolavf: Make sure avg_frame_rate can be calculated without integer overflow
Martin Storsjö [Mon, 15 Jul 2013 13:44:20 +0000 (16:44 +0300)]
lavf: Make sure avg_frame_rate can be calculated without integer overflow

If either of the deltas is too large for the multiplications to
succeed, don't use this for setting the avg frame rate.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agomov: Do not allow updating the time scale after it has been set
Martin Storsjö [Mon, 15 Jul 2013 14:13:54 +0000 (17:13 +0300)]
mov: Do not allow updating the time scale after it has been set

The time scale is set in mdhd, and later validated in the
enclosing trak atom once all of its children have been parsed.

A loose mdhd atom outside of a trak atom could update the time
scale of the last stream without any validation.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agomov: Seek back if overreading an individual atom
Martin Storsjö [Mon, 15 Jul 2013 12:59:50 +0000 (15:59 +0300)]
mov: Seek back if overreading an individual atom

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoac3dec: Don't consume more data than the actual input packet size
Martin Storsjö [Mon, 15 Jul 2013 08:28:46 +0000 (11:28 +0300)]
ac3dec: Don't consume more data than the actual input packet size

This was handled properly in the normal return case at the end
of the function, but not in this special case.

Returning a value larger than the input packet size can cause
problems for certain library users.

Returning the actual input buffer size unconditionally, since
it is not guaranteed that frame_size is set to a sensible
value at this point.

Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoindeo: Reject impossible FRAMETYPE_NULL
Luca Barbato [Sun, 14 Jul 2013 16:16:56 +0000 (18:16 +0200)]
indeo: Reject impossible FRAMETYPE_NULL

A frame marked FRAMETYPE_NULL cannot be scalable and requires a
previous frame successfully decoded.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoindeo: Do not reference mismatched tiles
Luca Barbato [Sun, 14 Jul 2013 14:49:43 +0000 (16:49 +0200)]
indeo: Do not reference mismatched tiles

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoindeo: Sanitize ff_ivi_init_planes fail paths
Luca Barbato [Sun, 14 Jul 2013 13:48:17 +0000 (15:48 +0200)]
indeo: Sanitize ff_ivi_init_planes fail paths

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoindeo5: return proper error codes
Luca Barbato [Sun, 14 Jul 2013 12:41:56 +0000 (14:41 +0200)]
indeo5: return proper error codes

7 years agoindeo: Bound-check before applying motion compensation
Luca Barbato [Sun, 14 Jul 2013 12:06:16 +0000 (14:06 +0200)]
indeo: Bound-check before applying motion compensation

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agortsp: Include an User-Agent header field in all requests
Martin Storsjö [Fri, 12 Jul 2013 09:14:12 +0000 (12:14 +0300)]
rtsp: Include an User-Agent header field in all requests

Some rtsp servers like the IP Cam IcyBox IB-CAM2002 need it.

Based on a patch by Carl Eugen Hoyos.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoindeo: Bound-check before applying transform
Luca Barbato [Fri, 12 Jul 2013 12:33:24 +0000 (14:33 +0200)]
indeo: Bound-check before applying transform

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoindeo4: Validate scantable dimension
Luca Barbato [Fri, 12 Jul 2013 16:10:05 +0000 (18:10 +0200)]
indeo4: Validate scantable dimension

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoindeo4: Check the quantization matrix index
Luca Barbato [Fri, 12 Jul 2013 13:02:33 +0000 (15:02 +0200)]
indeo4: Check the quantization matrix index

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoindeo4: Do not access missing reference MV
Luca Barbato [Fri, 12 Jul 2013 12:32:03 +0000 (14:32 +0200)]
indeo4: Do not access missing reference MV

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoac3dec: Consistently use AC3_BLOCK_SIZE and sizeof
Martin Storsjö [Thu, 11 Jul 2013 13:39:23 +0000 (16:39 +0300)]
ac3dec: Consistently use AC3_BLOCK_SIZE and sizeof

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agoac3dec: Increment channel pointers only once per channel
Martin Storsjö [Thu, 11 Jul 2013 13:30:18 +0000 (16:30 +0300)]
ac3dec: Increment channel pointers only once per channel

If the channel mapping map multiple output channels to one
input channel, we should only increment the actual pointer once.

Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agojpeg2000: Remove unused passes array in Jpeg200Cblk structure
Nicolas Bertrand [Sat, 13 Jul 2013 08:10:26 +0000 (10:10 +0200)]
jpeg2000: Remove unused passes array in Jpeg200Cblk structure

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
7 years agojpeg2000: Initialize only once mqc arrays
Nicolas Bertrand [Fri, 12 Jul 2013 21:15:43 +0000 (23:15 +0200)]
jpeg2000: Initialize only once mqc arrays

Improves decoding speed.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
7 years agovf_interlace: better handling of odd video size
Michael Niedermayer [Tue, 9 Jul 2013 15:57:49 +0000 (17:57 +0200)]
vf_interlace: better handling of odd video size

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agofate: use current syntax for the scale filter
Sean McGovern [Wed, 10 Jul 2013 17:37:05 +0000 (13:37 -0400)]
fate: use current syntax for the scale filter

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agodca: Respect the current limits in the downmixing capabilities
Luca Barbato [Wed, 10 Jul 2013 17:00:15 +0000 (19:00 +0200)]
dca: Respect the current limits in the downmixing capabilities

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agodca: Error out on missing DSYNC
Luca Barbato [Wed, 10 Jul 2013 16:07:45 +0000 (18:07 +0200)]
dca: Error out on missing DSYNC

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agopcm: always use codec->id instead of codec_id
Luca Barbato [Wed, 10 Jul 2013 02:54:49 +0000 (04:54 +0200)]
pcm: always use codec->id instead of codec_id

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agovdpau: use the correct namespace for the union
Luca Barbato [Wed, 10 Jul 2013 18:27:03 +0000 (20:27 +0200)]
vdpau: use the correct namespace for the union

Vdp is used by libvdpau, use AVVDPAU as used for the rest.

Reported-by: Alexis Ballier <aballier@gentoo.org>
7 years agomlpdec: Do not set invalid context in read_restart_header
Luca Barbato [Wed, 10 Jul 2013 02:35:34 +0000 (04:35 +0200)]
mlpdec: Do not set invalid context in read_restart_header

The faulty values rippled further down the codepath causing a
hard-to-track segfault in the assembly code.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agomlpdsp: x86: Respect cpuflags
Luca Barbato [Wed, 10 Jul 2013 01:18:14 +0000 (03:18 +0200)]
mlpdsp: x86: Respect cpuflags

7 years agopcx: Do not overread source buffer in pcx_rle_decode
Luca Barbato [Sat, 29 Jun 2013 04:37:32 +0000 (06:37 +0200)]
pcx: Do not overread source buffer in pcx_rle_decode

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agopcx: K&R formatting cosmetics
Luca Barbato [Sat, 29 Jun 2013 04:25:31 +0000 (06:25 +0200)]
pcx: K&R formatting cosmetics

7 years agoconfigure: Check for support for labels in the inline assembly
Martin Storsjö [Tue, 9 Jul 2013 17:51:00 +0000 (20:51 +0300)]
configure: Check for support for labels in the inline assembly

Use this for enabling the ppc timer.h implementation only on
assemblers that support labels in the inline assembly.

Signed-off-by: Martin Storsjö <martin@martin.st>
7 years agowmavoice: conceal clearly corrupted blocks
Luca Barbato [Sat, 29 Jun 2013 03:29:54 +0000 (05:29 +0200)]
wmavoice: conceal clearly corrupted blocks

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agowmavoice: use init_static_data
Luca Barbato [Sat, 29 Jun 2013 01:10:59 +0000 (03:10 +0200)]
wmavoice: use init_static_data

7 years agowmavoice: return meaningful error codes
Luca Barbato [Sat, 29 Jun 2013 01:02:02 +0000 (03:02 +0200)]
wmavoice: return meaningful error codes

7 years agoiff: Do not read over the source buffer
Luca Barbato [Sat, 29 Jun 2013 05:26:48 +0000 (07:26 +0200)]
iff: Do not read over the source buffer

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoiff: K&R formatting cosmetics
Luca Barbato [Sat, 29 Jun 2013 05:05:54 +0000 (07:05 +0200)]
iff: K&R formatting cosmetics

7 years agoqdm2: Conceal broken samples
Luca Barbato [Tue, 9 Jul 2013 12:59:33 +0000 (14:59 +0200)]
qdm2: Conceal broken samples

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoqdm2: refactor joined stereo support
Luca Barbato [Tue, 9 Jul 2013 12:44:02 +0000 (14:44 +0200)]
qdm2: refactor joined stereo support

qdm2 does support only two channels. Loop over the run once.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoadpcm: Write the correct number of samples for ima-dk4
Luca Barbato [Sun, 7 Jul 2013 10:56:12 +0000 (12:56 +0200)]
adpcm: Write the correct number of samples for ima-dk4

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoimc: Catch a division by zero
Luca Barbato [Tue, 9 Jul 2013 07:18:16 +0000 (09:18 +0200)]
imc: Catch a division by zero

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
7 years agoatrac3: Error on impossible encoding/channel combinations
Luca Barbato [Tue, 9 Jul 2013 02:44:26 +0000 (04:44 +0200)]
atrac3: Error on impossible encoding/channel combinations

Joint stereo encoded mono is impossible.

Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org