x86: cabac: remove hardcoded ebx in inline asm
authorMans Rullgard <mans@mansr.com>
Mon, 20 Jun 2011 01:31:53 +0000 (02:31 +0100)
committerMans Rullgard <mans@mansr.com>
Mon, 20 Jun 2011 21:36:30 +0000 (22:36 +0100)
Signed-off-by: Mans Rullgard <mans@mansr.com>
libavcodec/cabac.h
libavcodec/x86/h264_i386.h

index 67a332e..b868f77 100644 (file)
@@ -270,7 +270,7 @@ static void refill(CABACContext *c){
     c->bytestream+= CABAC_BITS/8;
 }
 
-#if ! ( ARCH_X86 && HAVE_7REGS && HAVE_EBX_AVAILABLE && !defined(BROKEN_RELOCATIONS) )
+#if ! ( ARCH_X86 && HAVE_7REGS && !defined(BROKEN_RELOCATIONS) )
 static void refill2(CABACContext *c){
     int i, x;
 
@@ -309,8 +309,8 @@ static inline void renorm_cabac_decoder_once(CABACContext *c){
 
 static av_always_inline int get_cabac_inline(CABACContext *c, uint8_t * const state){
     //FIXME gcc generates duplicate load/stores for c->low and c->range
-#if ARCH_X86 && HAVE_7REGS && HAVE_EBX_AVAILABLE && !defined(BROKEN_RELOCATIONS)
-    int bit;
+#if ARCH_X86 && HAVE_7REGS && !defined(BROKEN_RELOCATIONS)
+    int bit, low;
 
 #if HAVE_FAST_CMOV
 #define BRANCHLESS_GET_CABAC_UPDATE(ret, cabac, statep, low, lowword, range, tmp, tmpbyte)\
@@ -370,20 +370,20 @@ static av_always_inline int get_cabac_inline(CABACContext *c, uint8_t * const st
         "1:                                                             \n\t"
 
     __asm__ volatile(
-        "movl %a3(%2), %%esi            \n\t"
-        "movl %a4(%2), %%ebx            \n\t"
-        BRANCHLESS_GET_CABAC("%0", "%2", "(%1)", "%%ebx", "%%bx", "%%esi", "%%edx", "%%dl", "%a5")
-        "movl %%esi, %a3(%2)            \n\t"
-        "movl %%ebx, %a4(%2)            \n\t"
+        "movl %a4(%3), %%esi            \n\t"
+        "movl %a5(%3), %1               \n\t"
+        BRANCHLESS_GET_CABAC("%0", "%3", "(%2)", "%1", "%w1", "%%esi", "%%edx", "%%dl", "%a6")
+        "movl %%esi, %a4(%3)            \n\t"
+        "movl %1, %a5(%3)               \n\t"
 
-        :"=&a"(bit)
+        :"=&a"(bit), "=&r"(low)
         :"r"(state), "r"(c),
          "i"(offsetof(CABACContext, range)), "i"(offsetof(CABACContext, low)),
          "i"(offsetof(CABACContext, bytestream))
-        : "%"REG_c, "%ebx", "%edx", "%esi", "memory"
+        : "%"REG_c, "%edx", "%esi", "memory"
     );
     bit&=1;
-#else /* ARCH_X86 && HAVE_7REGS && HAVE_EBX_AVAILABLE && !defined(BROKEN_RELOCATIONS) */
+#else /* ARCH_X86 && HAVE_7REGS && !defined(BROKEN_RELOCATIONS) */
     int s = *state;
     int RangeLPS= ff_h264_lps_range[2*(c->range&0xC0) + s];
     int bit, lps_mask;
@@ -403,7 +403,7 @@ static av_always_inline int get_cabac_inline(CABACContext *c, uint8_t * const st
     c->low  <<= lps_mask;
     if(!(c->low & CABAC_MASK))
         refill2(c);
-#endif /* ARCH_X86 && HAVE_7REGS && HAVE_EBX_AVAILABLE && !defined(BROKEN_RELOCATIONS) */
+#endif /* ARCH_X86 && HAVE_7REGS && !defined(BROKEN_RELOCATIONS) */
     return bit;
 }
 
@@ -433,36 +433,37 @@ static int av_unused get_cabac_bypass(CABACContext *c){
 
 
 static av_always_inline int get_cabac_bypass_sign(CABACContext *c, int val){
-#if ARCH_X86 && HAVE_EBX_AVAILABLE
+#if ARCH_X86
+    x86_reg tmp;
     __asm__ volatile(
-        "movl %a2(%1), %%ebx                    \n\t"
-        "movl %a3(%1), %%eax                    \n\t"
-        "shl $17, %%ebx                         \n\t"
+        "movl %a3(%2), %k1                      \n\t"
+        "movl %a4(%2), %%eax                    \n\t"
+        "shl $17, %k1                           \n\t"
         "add %%eax, %%eax                       \n\t"
-        "sub %%ebx, %%eax                       \n\t"
+        "sub %k1, %%eax                         \n\t"
         "cltd                                   \n\t"
-        "and %%edx, %%ebx                       \n\t"
-        "add %%ebx, %%eax                       \n\t"
+        "and %%edx, %k1                         \n\t"
+        "add %k1, %%eax                         \n\t"
         "xor %%edx, %%ecx                       \n\t"
         "sub %%edx, %%ecx                       \n\t"
         "test %%ax, %%ax                        \n\t"
         " jnz 1f                                \n\t"
-        "mov  %a4(%1), %%"REG_b"                \n\t"
+        "mov  %a5(%2), %1                       \n\t"
         "subl $0xFFFF, %%eax                    \n\t"
-        "movzwl (%%"REG_b"), %%edx              \n\t"
+        "movzwl (%1), %%edx                     \n\t"
         "bswap %%edx                            \n\t"
         "shrl $15, %%edx                        \n\t"
-        "add  $2, %%"REG_b"                     \n\t"
+        "add  $2, %1                            \n\t"
         "addl %%edx, %%eax                      \n\t"
-        "mov  %%"REG_b", %a4(%1)                \n\t"
+        "mov  %1, %a5(%2)                       \n\t"
         "1:                                     \n\t"
-        "movl %%eax, %a3(%1)                    \n\t"
+        "movl %%eax, %a4(%2)                    \n\t"
 
-        :"+c"(val)
+        :"+c"(val), "=&r"(tmp)
         :"r"(c),
          "i"(offsetof(CABACContext, range)), "i"(offsetof(CABACContext, low)),
          "i"(offsetof(CABACContext, bytestream))
-        : "%eax", "%"REG_b, "%edx", "memory"
+        : "%eax", "%edx", "memory"
     );
     return val;
 #else
index b6c225a..ba3a5dd 100644 (file)
@@ -35,7 +35,7 @@
 
 //FIXME use some macros to avoid duplicating get_cabac (cannot be done yet
 //as that would make optimization work hard)
-#if ARCH_X86 && HAVE_7REGS && HAVE_EBX_AVAILABLE && !defined(BROKEN_RELOCATIONS)
+#if ARCH_X86 && HAVE_7REGS && !defined(BROKEN_RELOCATIONS)
 static int decode_significance_x86(CABACContext *c, int max_coeff,
                                    uint8_t *significant_coeff_ctx_base,
                                    int *index, x86_reg last_off){
@@ -43,25 +43,26 @@ static int decode_significance_x86(CABACContext *c, int max_coeff,
     int minusstart= -(int)significant_coeff_ctx_base;
     int minusindex= 4-(int)index;
     int coeff_count;
+    int low;
     __asm__ volatile(
-        "movl %a8(%3), %%esi                    \n\t"
-        "movl %a9(%3), %%ebx                    \n\t"
+        "movl %a9(%4), %%esi                    \n\t"
+        "movl %a10(%4), %3                      \n\t"
 
         "2:                                     \n\t"
 
-        BRANCHLESS_GET_CABAC("%%edx", "%3", "(%1)", "%%ebx",
-                             "%%bx", "%%esi", "%%eax", "%%al", "%a10")
+        BRANCHLESS_GET_CABAC("%%edx", "%4", "(%1)", "%3",
+                             "%w3", "%%esi", "%%eax", "%%al", "%a11")
 
         "test $1, %%edx                         \n\t"
         " jz 3f                                 \n\t"
-        "add  %7, %1                            \n\t"
+        "add  %8, %1                            \n\t"
 
-        BRANCHLESS_GET_CABAC("%%edx", "%3", "(%1)", "%%ebx",
-                             "%%bx", "%%esi", "%%eax", "%%al", "%a10")
+        BRANCHLESS_GET_CABAC("%%edx", "%4", "(%1)", "%3",
+                             "%w3", "%%esi", "%%eax", "%%al", "%a11")
 
-        "sub  %7, %1                            \n\t"
+        "sub  %8, %1                            \n\t"
         "mov  %2, %%"REG_a"                     \n\t"
-        "movl %4, %%ecx                         \n\t"
+        "movl %5, %%ecx                         \n\t"
         "add  %1, %%"REG_c"                     \n\t"
         "movl %%ecx, (%%"REG_a")                \n\t"
 
@@ -73,23 +74,24 @@ static int decode_significance_x86(CABACContext *c, int max_coeff,
 
         "3:                                     \n\t"
         "add  $1, %1                            \n\t"
-        "cmp  %5, %1                            \n\t"
+        "cmp  %6, %1                            \n\t"
         " jb 2b                                 \n\t"
         "mov  %2, %%"REG_a"                     \n\t"
-        "movl %4, %%ecx                         \n\t"
+        "movl %5, %%ecx                         \n\t"
         "add  %1, %%"REG_c"                     \n\t"
         "movl %%ecx, (%%"REG_a")                \n\t"
         "4:                                     \n\t"
-        "add  %6, %%eax                         \n\t"
+        "add  %7, %%eax                         \n\t"
         "shr $2, %%eax                          \n\t"
 
-        "movl %%esi, %a8(%3)                    \n\t"
-        "movl %%ebx, %a9(%3)                    \n\t"
-        :"=&a"(coeff_count), "+r"(significant_coeff_ctx_base), "+m"(index)
+        "movl %%esi, %a9(%4)                    \n\t"
+        "movl %3, %a10(%4)                      \n\t"
+        :"=&a"(coeff_count), "+r"(significant_coeff_ctx_base), "+m"(index),
+         "=&r"(low)
         :"r"(c), "m"(minusstart), "m"(end), "m"(minusindex), "m"(last_off),
          "i"(offsetof(CABACContext, range)), "i"(offsetof(CABACContext, low)),
          "i"(offsetof(CABACContext, bytestream))
-        : "%"REG_c, "%ebx", "%edx", "%esi", "memory"
+        : "%"REG_c, "%edx", "%esi", "memory"
     );
     return coeff_count;
 }
@@ -99,31 +101,32 @@ static int decode_significance_8x8_x86(CABACContext *c,
                                        int *index, x86_reg last_off, const uint8_t *sig_off){
     int minusindex= 4-(int)index;
     int coeff_count;
+    int low;
     x86_reg last=0;
     __asm__ volatile(
-        "movl %a8(%3), %%esi                    \n\t"
-        "movl %a9(%3), %%ebx                    \n\t"
+        "movl %a9(%4), %%esi                    \n\t"
+        "movl %a10(%4), %3                      \n\t"
 
         "mov %1, %%"REG_D"                      \n\t"
         "2:                                     \n\t"
 
-        "mov %6, %%"REG_a"                      \n\t"
+        "mov %7, %%"REG_a"                      \n\t"
         "movzbl (%%"REG_a", %%"REG_D"), %%edi   \n\t"
-        "add %5, %%"REG_D"                      \n\t"
+        "add %6, %%"REG_D"                      \n\t"
 
-        BRANCHLESS_GET_CABAC("%%edx", "%3", "(%%"REG_D")", "%%ebx",
-                             "%%bx", "%%esi", "%%eax", "%%al", "%a10")
+        BRANCHLESS_GET_CABAC("%%edx", "%4", "(%%"REG_D")", "%3",
+                             "%w3", "%%esi", "%%eax", "%%al", "%a11")
 
         "mov %1, %%edi                          \n\t"
         "test $1, %%edx                         \n\t"
         " jz 3f                                 \n\t"
 
         "movzbl "MANGLE(last_coeff_flag_offset_8x8)"(%%edi), %%edi\n\t"
-        "add %5, %%"REG_D"                      \n\t"
-        "add %7, %%"REG_D"                      \n\t"
+        "add %6, %%"REG_D"                      \n\t"
+        "add %8, %%"REG_D"                      \n\t"
 
-        BRANCHLESS_GET_CABAC("%%edx", "%3", "(%%"REG_D")", "%%ebx",
-                             "%%bx", "%%esi", "%%eax", "%%al", "%a10")
+        BRANCHLESS_GET_CABAC("%%edx", "%4", "(%%"REG_D")", "%3",
+                             "%w3", "%%esi", "%%eax", "%%al", "%a11")
 
         "mov %2, %%"REG_a"                      \n\t"
         "mov %1, %%edi                          \n\t"
@@ -143,20 +146,19 @@ static int decode_significance_8x8_x86(CABACContext *c,
         "mov %2, %%"REG_a"                      \n\t"
         "movl %%edi, (%%"REG_a")                \n\t"
         "4:                                     \n\t"
-        "addl %4, %%eax                         \n\t"
+        "addl %5, %%eax                         \n\t"
         "shr $2, %%eax                          \n\t"
 
-        "movl %%esi, %a8(%3)                    \n\t"
-        "movl %%ebx, %a9(%3)                    \n\t"
-        :"=&a"(coeff_count),"+m"(last), "+m"(index)
+        "movl %%esi, %a9(%4)                    \n\t"
+        "movl %3, %a10(%4)                      \n\t"
+        :"=&a"(coeff_count),"+m"(last), "+m"(index), "=&r"(low)
         :"r"(c), "m"(minusindex), "m"(significant_coeff_ctx_base), "m"(sig_off), "m"(last_off),
          "i"(offsetof(CABACContext, range)), "i"(offsetof(CABACContext, low)),
          "i"(offsetof(CABACContext, bytestream))
-        : "%"REG_c, "%ebx", "%edx", "%esi", "%"REG_D, "memory"
+        : "%"REG_c, "%edx", "%esi", "%"REG_D, "memory"
     );
     return coeff_count;
 }
-#endif /* ARCH_X86 && HAVE_7REGS && HAVE_EBX_AVAILABLE */
-       /* !defined(BROKEN_RELOCATIONS) */
+#endif /* ARCH_X86 && HAVE_7REGS && !defined(BROKEN_RELOCATIONS) */
 
 #endif /* AVCODEC_X86_H264_I386_H */