2014-01-07 Michael Niedermayervc1dec: Don't decode slices when the latest slice heade...
2014-01-07 Martin Storsjövc1dec: Make sure last_picture is initialized in vc1_de...
2014-01-07 Martin Storsjör3d: Add more input value validation
2014-01-07 Martin Storsjöfraps: Make the input buffer size checks more strict
2014-01-07 Martin Storsjösvq3: Avoid a division by zero
2014-01-07 Martin Storsjörmdec: Validate the fps value
2014-01-07 Martin Storsjötwinvqdec: Check the ibps parameter separately
2014-01-07 Martin Storsjöasfdec: Check the return value of asf_read_stream_prope...
2014-01-07 Anton Khirnovmxfdec: set audio timebase to 1/samplerate
2014-01-07 Martin Storsjöpcx: Check the packet size before assuming it fits...
2014-01-07 Martin Storsjörpza: Fix a buffer size check
2014-01-07 Martin Storsjöxxan: Disallow odd width
2014-01-07 Martin Storsjöxan: Only read within the data that actually was initia...
2014-01-07 Martin Storsjöxan: Use bytestream2 to limit reading to within the...
2014-01-07 Martin Storsjöpcx: Consume the whole packet if giving up due to missi...
2014-01-07 Martin Storsjöpngdec: Stop trying to decode once inflate returns...
2014-01-07 Martin Storsjömov: Make sure the read sample count is nonnegative
2014-01-07 Martin Storsjöbfi: Add some very basic sanity checks for input packet...
2014-01-07 Martin Storsjöbfi: Avoid divisions by zero
2014-01-07 Martin Storsjöelectronicarts: Add more sanity checking for the number...
2014-01-07 Martin Storsjöriffdec: Add sanity checks for the sample rate
2014-01-07 Martin Storsjömvi: Add sanity checking for the audio frame size
2014-01-07 Martin Storsjöxwma: Avoid division by zero
2014-01-07 Martin Storsjöavidec: Make sure a packet is large enough before readi...
2014-01-07 Martin Storsjövqf: Make sure the bitrate is in the valid range
2014-01-07 Martin Storsjövqf: Make sure sample_rate is set to a valid value
2014-01-07 Martin Storsjövc1dec: Undo mpegvideo initialization if unable to...
2014-01-07 Martin Storsjövc1dec: Fix leaks in ff_vc1_decode_init_alloc_tables...
2014-01-07 Martin Storsjöwnv1: Make sure the input packet is large enough
2014-01-07 Martin Storsjödca: Validate the lfe parameter
2014-01-07 Martin Storsjörl2: Avoid a division by zero
2014-01-07 Martin Storsjöwtv: Add more sanity checks for a length read from...
2014-01-07 Martin Storsjösegafilm: Validate the number of audio channels
2014-01-07 Martin Storsjöqpeg: Add checks for running out of rows in qpeg_decode...
2014-01-07 Martin Storsjömpegaudiodec: Validate that the number of channels...
2014-01-07 Martin Storsjöasv1: Verify the amount of extradata
2014-01-07 Martin Storsjöidroqdec: Make sure a video stream has been allocated...
2014-01-07 Martin Storsjörv10: Validate the dimensions set from the container
2014-01-07 Martin Storsjöxmv: Add more sanity checks for parameters read from...
2014-01-07 Martin Storsjöffv1: Make sure at least one slice context is initialized
2014-01-07 Martin Storsjötruemotion2: Use av_freep properly in an error path
2014-01-07 Martin Storsjöeacmv: Make sure a reference frame exists before refere...
2014-01-07 Martin Storsjömpeg4videodec: Check the width/height in mpeg4_decode_s...
2014-01-07 Martin Storsjöivi_common: Make sure color planes have been initialized
2014-01-07 Martin Storsjöoggparseogm: Convert to use bytestream2
2014-01-07 Martin Storsjörv34: Check the return value from ff_rv34_decode_init
2014-01-07 Martin Storsjömatroskadec: Verify realaudio codec parameters
2014-01-07 Martin Storsjömace: Make sure that the channel count is set to a...
2014-01-07 Martin Storsjösvq3: Check for any negative return value from ff_h264_...
2014-01-07 Martin Storsjövp3: Check the framerate for validity
2014-01-07 Martin Storsjöcavsdec: Make sure a sequence header has been decoded...
2014-01-07 Martin Storsjösierravmd: Do sanity checking of frame sizes
2014-01-07 Martin Storsjöomadec: Properly check lengths before incrementing...
2014-01-07 Martin Storsjömpc8: Make sure the first stream exists before parsing...
2014-01-07 Martin Storsjömpc8: Check the seek table size parsed from the bitstream
2014-01-07 Michael Niedermayerzmbvdec: Check the buffer size for uncompressed data
2014-01-07 Martin Storsjöape: Don't allow the seektable to be omitted
2014-01-07 Martin Storsjöshorten: Break out of loop looking for fmt chunk if...
2014-01-07 Martin Storsjöshorten: Use a checked bytestream reader for the wave...
2014-01-07 Martin Storsjösmacker: Make sure we don't fill in huffman codes out...
2014-01-07 Martin Storsjösmacker: Avoid integer overflow when allocating packets
2014-01-07 Martin Storsjösmacker: Don't return packets in unallocated streams
2014-01-07 Martin Storsjödsicin: Add some basic sanity checks for fields read...
2013-12-20 Martin Storsjöarm: Don't clobber callee saved registers in scalarproduct
2013-12-14 Reinhard TartlerPrepare for 0.8.10 Release
2013-12-14 Michael Niedermayerroqvideodec: check dimensions validity
2013-12-14 Michael Niedermayerqdm2: check array index before use, fix out of array...
2013-12-14 Reinhard Tartleralsdec: check block length
2013-11-02 Reinhard TartlerChangelog for 0.8.9
2013-11-02 Reinhard TartlerPrepare for 0.8.7 Release
2013-10-30 Diego Biurrunx86: fft: Remove 3DNow! optimizations, they break FATE
2013-10-29 Diego Biurrunx86: ac3dsp: Drop mmx variant of ac3_max_msb_abs_int16
2013-10-28 Luca Barbatoaac: Check init_get_bits return value
2013-10-28 Luca Barbatoaac: return meaningful errors
2013-10-28 Luca Barbatodsicinav: K&R formatting cosmetics
2013-10-28 Martin Storsjömov: Seek back if overreading an individual atom
2013-10-28 Anton Khirnovvcr1: add sanity checks
2013-10-28 Anton Khirnovpictordec: pass correct context to avpriv_request_sample
2013-10-28 Luca Barbatodsicinav: Clip the source size to the expected maximum
2013-10-28 Luca Barbatoalsdec: Clean up error paths
2013-10-28 Reimar Döffingerogg: Fix potential infinite discard loop
2013-10-16 Luca Barbatonuv: check rtjpeg_decode_frame_yuv420 return value
2013-10-16 Luca Barbatonuv: Reset the frame on resize
2013-10-16 Luca Barbatonuv: Use av_fast_realloc
2013-10-16 Anton Khirnovnuv: return meaningful error codes.
2013-10-16 Luca Barbatonuv: Pad the lzo outbuf
2013-10-16 Luca Barbatonuv: Do not ignore lzo decompression failures
2013-10-16 Luca Barbatooma: correctly mark and decrypt partial packets
2013-10-16 Luca Barbatooma: check geob tag boundary
2013-10-16 Luca Barbatooma: refactor seek function
2013-10-16 Luca Barbato8bps: Bound-check the input buffer
2013-10-16 Luca Barbatortmp: Do not misuse memcmp
2013-10-16 Luca Barbatortmp: rename data_size to size
2013-10-16 Luca Barbatolavc: set the default rc_initial_buffer_occupancy
2013-09-29 Luca Barbato4xm: Reject not a multiple of 16 dimension
2013-09-29 Luca Barbato4xm: do not overread the prestream buffer
2013-09-29 Luca Barbato4xm: validate the buffer size before parsing it
2013-09-29 Luca Barbatoindeo: Do not reference mismatched tiles
2013-09-29 Luca Barbatoindeo: Sanitize ff_ivi_init_planes fail paths
2013-09-29 Luca Barbatoindeo: Bound-check before applying motion compensation